I'm getting close to finishing the setup of my 7x2x2, 210 gallon tank. However, my wife noticed something that had escaped me. I built my own stand for this tank and near the center, the top framework of the stand droops about 1/8" below the glass. Will this be ok? Ideally, it would have been flush with the bottom. I don't know how I didn't notice this before. Do you think the weight of tank will compress the wood on the edges enough so that the center will sit flush on the wood? I'm afraid of the strain that it will put on the bottom glass and seals if it doesn't.
Help! Possible speed bump.
- Thread starter Jmart159
- Start date
If it was me, i would fix it. It could be that piece is warped or the vertical you have under it is to short. Either way shouldn't be to hard of a fix if you didn't glue it.
Sent from my LGL86C using MonsterAquariaNetwork App
Sent from my LGL86C using MonsterAquariaNetwork App