Okay so I was sealing the crack in my tank and I noticed this. should I be able to do this? Im pretty sure I shouldnt be able to... what should I do? can I try and put 100% silicone inbetween the glass and frame and clamp it and see if itll hold???
help quick
- Thread starter Garrett.turbo
- Start date
its not cracked thats a piece of aluminum between the frame and glass i put some silicone and clamped it down hopfully it will fix is with it being clamped over night
duh I no I put it the to see how big the gap was. not to be mean but it was just to see the gap space.
Some of my tanks have gaps between the trim and glass- I've never had any issues with mine. And I sometimes just use silicon and squirt it up there so that there's not longer a gap. So far so good.
I mean, if you think about it, it can't be super tight because of the glass needing to flex, and you would never be able to get the trim on with silicon if it was already made to fit on the tank tight.
I mean, if you think about it, it can't be super tight because of the glass needing to flex, and you would never be able to get the trim on with silicon if it was already made to fit on the tank tight.
mshill90;5017153; said:
okay sounds like what I did was good then. its just wierd because its only like that half way down each side.