TODAY I WAS CHANGING THE WATER AND MY FILTER JUST STOP WORKING I NEED TO KNOW IF THERE ANYTHING I CAN DO OR DO I HAVE TO BUY ANOTHER 1 and if so what is the price of a new 1
HELP WET AND DRY filtration STOP WORKING
- Thread starter youngxpockus
- Start date
Ya^ and wat type of filter was it. Did it make a lot of noise before. Did you get the plug wet. We need more information to help
A lot more information. Is it a W/D Filter and if so what part stopped running? The pump? Overflow? Can't even tell what kind of filter you're referring to from your post because it's lacking all the important information.
What type of filter? I see "WET AND DRY" but W/D filters run off pumps so are you referring to a pump?.... Thinking you're referring to a canister or hob since your asking how much for new one?... Need the info...
EDIT: Also I'd wait longer than 32 minutes before bumping your own post...
What type of filter? I see "WET AND DRY" but W/D filters run off pumps so are you referring to a pump?.... Thinking you're referring to a canister or hob since your asking how much for new one?... Need the info...
EDIT: Also I'd wait longer than 32 minutes before bumping your own post...
Okay... So your running a w/d. A poor picture isn't going to give us all the information we need. From what I see your running a w/d, seem to have a pump outside running inline, okay... So what's the problem? WHAT is not running? Are the tubes clogged? Is your pump what's not running? ie: is it not pushing water? Are your pressure valves open? Is your pump plugged in? Did you unplug your pump while doing your wc? Is it being fed by an overflow box or is it a drilled tank, intank overflow? Again, we need detailed information on your filtration setup to help you trouble shoot it. Only thing this picture does is tell us your running a w/d with an inline pump.
Did you set your filtration up yourself cause you don't seem to know much about it???
Did you set your filtration up yourself cause you don't seem to know much about it???
the pump just stop working when i did my water change it dosent push the water to make it flow
unplug it, drain it, disconnect the pump, make sure the impeller isnt broken or clogged, plug it in, check if its spins, clean it, if it works reconnect it and fill with water and plug in.
there is a good chance your impeller is stuck.
use logic! you can do it!
there is a good chance your impeller is stuck.
use logic! you can do it!