help with ibc tote and large dw

[rays_fish]

Hey MFK,

got two questions for yall...

1.) I picked up a 330g IBC tote ( used to have White Mineral Oil in it), I filled it with water and dish soap, but there is still a greasy residue. Any thoughts on how I can get it all off? Planning on using the tote to hold RO water.

2.) just got a VERY long piece of dw which is about 5ft long. Trying ot figure a way to soak it.... any ideas? not too sure what kind of dw it is either.

 

[Squirtle919]

wash the icb a lot more! all the chemical grades need lots of washing. once thats done throw the dw in there and hold your RO in something else a cheap 10$ bin from the hardware shop for the time.

 

[rays_fish]

wash the icb a lot more! all the chemical grades need lots of washing. once thats done throw the dw in there and hold your RO in something else a cheap 10$ bin from the hardware shop for the time.

Should I try other type of chemicals to clean out the tote? I have some super strength degreaser I use for the garage floor but wasnt too sure if I should use it on the tote. But it does say its biodegradable....