Help with my acrylic tank stand build

[k7q]

I started building my stand but need some help. My tank is 5x2x2. My stand is 39" tall.

Anyone built a stand for an acrylic tank before? Do I HAVE to support the entire bottom of the tank? Like put plywood for support.

What kind of wood should I use for the sides of th stand?

Will have picture of the stand when I'm home.

 

[john73738]

Yes you want to support the entire bottom of the tank. Styro would be advisable also. The top you want 3/4" ply, the sides can be 1/2".

 

[marauders30]

i used plywood and 2x4's. had them cut to exact measurements at lowes. 3/4 in plywood for everything. i think 1/2 inch would work on the sides though

 

[Pharaoh]

I used 1/2" plywood for the top of my stand. No need to go to 3/4", just make sure there is plenty of support.

 

[kdrun76]

The sides could be card board if the supports (2 x 4's) under it are fine. I would use 3/4" on top though.