help with pvc sizing

[giar]

Hi guys, i am currently running 2x fx6 and eheim 2217 for my 200x90x60cm (285 gal) tank. My current turnover rate is about 5x tank size. (563x 2 + 265 : 1391/ 285 = 4.9)

Since i have an used 60 gal tank (100x45x50cm), thought i would make it as my first sump project.

I am trying to aim a 10x turnover rate from this sump which would be 2850 gallon/hr, what size of pvc i need to use to equalize the water output and input between the sump and the display tank?
Is it actually possible to get a 10x turnover rate with a 60gal sump in a 285 gal tank?

Side note : The tank is not drilled

 

[Imsobored152]

Hi guys, i am currently running 2x fx6 and eheim 2217 for my 200x90x60cm (285 gal) tank. My current turnover rate is about 5x tank size. (563x 2 + 265 : 1391/ 285 = 4.9)

Since i have an used 60 gal tank (100x45x50cm), thought i would make it as my first sump project.

I am trying to aim a 10x turnover rate from this sump which would be 2850 gallon/hr, what size of pvc i need to use to equalize the water output and input between the sump and the display tank?
Is it actually possible to get a 10x turnover rate with a 60gal sump in a 285 gal tank?

Side note : The tank is not drilled

You'll only ever get what your pumps put out. If 4.9x is what your pumps do now, thats the highest youll ever go. Your overflow will also limit your flow