How loud is everyones DIY overflows? My brother is moving and I might grab his 20g Long if he decides to part with it. My wife prefers extremely quiet as in canisters. Tank is a 75 so the 20 would be perfect. Here is the break down that I can think of:
20g Tank Free!
Egg Crate $10 2x4 sheet
Scrubbies $10-15
Glass or acrylic for spacers $15
Mag Drive 5 Pump $58
Gamma 25watt UV (need
one anyways) $120
Eheim Spray bar Kit $19
DIY 1" Overflow $10
1/2" Tubing 25ft $15
Misc $10
Total ~ $272 For a sump. would probably hard plumb it from the overflow to the tank.
What is everyones opinions? I currently have an FX5 and find it almost too much current in the 75 the pair of Jacks don't really like it either. What is everyone opinions, if all else fails I will just hook a UV too the FX5 but by the time I replace media/ pads, tubing, UV to handle the flow, etc it is going to cost more. Only problem is it almost needs to be dead quiet.
Craig
20g Tank Free!
Egg Crate $10 2x4 sheet
Scrubbies $10-15
Glass or acrylic for spacers $15
Mag Drive 5 Pump $58
Gamma 25watt UV (need
Eheim Spray bar Kit $19
DIY 1" Overflow $10
1/2" Tubing 25ft $15
Misc $10
Total ~ $272 For a sump. would probably hard plumb it from the overflow to the tank.
What is everyones opinions? I currently have an FX5 and find it almost too much current in the 75 the pair of Jacks don't really like it either. What is everyone opinions, if all else fails I will just hook a UV too the FX5 but by the time I replace media/ pads, tubing, UV to handle the flow, etc it is going to cost more. Only problem is it almost needs to be dead quiet.
Craig