How so i remove this?

[Sir KeepsAllot]

First off, this is glued onto the the bottom(on the outside) of my 125 acrylic. The tank is barebottom so you can see right through. I was wondering if anyone know of a method to remove this? It's like thick wallpaper or cardboard you can say. The previous owner glued it on and i forgot to ask him what was it and what he used to glue it on.

First picture is the view on the inside, the second is from the bottom and the third is the same is the first one but from far away.


Sent from my iPhone using MonsterAquariaNetwork app

 

[Miguel]

Soak it heavily amd then start peeling it off.

 

[joe jaskot]

If that is the original protective film they use on acrylic, it may be hard to remove once it has been on there for a long time. May be better off just leaving it alone.

 

[Squirtle919]

If that is the original protective film they use on acrylic, it may be hard to remove once it has been on there for a long time. May be better off just leaving it alone.

Yeah they leave awful marks and dont come off 100% best bet would be a razor and soaking it.

 

[Sir KeepsAllot]

If that is the original protective film they use on acrylic, it may be hard to remove once it has been on there for a long time. May be better off just leaving it alone.

I guess i'll have to save up for some black gravel.


Sent from my iPhone using MonsterAquariaNetwork app

 

[boldtogether]

I guess i'll have to save up for some black gravel.


Sent from my iPhone using MonsterAquariaNetwork app

Thats what I would do.

 

[Doyle1431]

I would do the same.

 

[Smart1]

Wall paper remover. It will break down the adhesive and it'll peel off.

 

[Smart1]

....And good choice on the SunSun filter! I own 4.

 

[mikec707]

Yeah they leave awful marks and dont come off 100% best bet would be a razor and soaking it.

+1 razor blade an boiling water


Sent from my iPhone using MonsterAquariaNetwork app