I've been researching how to fix a slow seep at the bottom corner of one of my acrylic tanks. (300 gallon.)
From my research, it looks like Weldon 16 is more for joining 2 pieces of acrylic together, as opposed to "sealing" a seam.
Should I run a "bead" of Weldon 3 / 4 along the inside bottom seam, or 16?
I do not want to fiddle with 2-parts / mixing.
It is not clear "exactly" where the seep begins. It is not cracked, nor separating.
Thank you in advance. Jude
From my research, it looks like Weldon 16 is more for joining 2 pieces of acrylic together, as opposed to "sealing" a seam.
Should I run a "bead" of Weldon 3 / 4 along the inside bottom seam, or 16?
I do not want to fiddle with 2-parts / mixing.
It is not clear "exactly" where the seep begins. It is not cracked, nor separating.
Thank you in advance. Jude
