I need a flow chart!!

  • We are currently upgrading MFK. thanks! -neo
Red_Man

Red_Man

Plecostomus
MFK Member
Sep 14, 2010
446
141
61
40
Indiana
I need a flow chart for a aqueon submersible 4000 pump. tired of looking for it.
 
Hello...

Not sure what you're looking for exactly. Installation instructions?
  1. Check pump for any signs of shipping damage. If damaged, do not operate and return to place of purchase.
  2. Insert suction cups into pump mounting bracket.
  3. Slide mounting bracket onto base of pump.
  4. Insert O-ring onto threaded filter connection. Screw desired connector into outlet of pump. Hand tighten only.
  5. Connect tubing or PVC pipe to outlet of pump and place inside sump or aquarium.
  6. Fill sump so that water level is above the top of the pump. Always make sure pump is completely submerged when operating. Do not run pump dry.
  7. Plug pump into receptacle. Be sure that the cord makes a "drip loop" to prevent water from running down and into the receptacle.
It's a 755 gph pump. Other than that, I don't know...sorry :)
 
Not what I need at all! But thanks. I need a chart that states head flow heights. The tank I want to use them on is very tall and I want to make sure it will do its job! i.e. : at 0 ft it will flow 755gph, at 2ft it will flow 655gph, so on and so forth. I cant find the info on the dealer web page nor on any other sites. Its driving me crazy. Please help!
 
I'm not seeing one listed. Not even on the Aqueon site. You might be out of luck on this one.
 
just compare to another pump at close to the same gph or just get a tool to measure the output after head loss i couldn't find much other than its stock gph....
 
Try searching for "pump performance curve". That is the technical term for the chart you're looking for. I doubt there is any published information since it's a single speed, single voltage, fixed vane pump.

The link Natasha posted should be helpful :)
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom