Hey guys thanks for you time on this!!
A while back I bought a 900 gallon plywood tank. I sanded everything down and resealed with a resin. For the most part everything sealed however I can't get a good seal on the acrylic window. I still get some leaks that pop through. I have resealed a second time inside the tank as well as outside the tank and regardless of what I do I still have the same issue.
I was thinking about pouring the resin down and then recovering the resin with silicone.
Is this a good idea or a bad idea??
Any thoughts? I'm stuck and annoyed at this point so any suggestions would be great short of completely pulling off the acrylic and resealing.
A while back I bought a 900 gallon plywood tank. I sanded everything down and resealed with a resin. For the most part everything sealed however I can't get a good seal on the acrylic window. I still get some leaks that pop through. I have resealed a second time inside the tank as well as outside the tank and regardless of what I do I still have the same issue.
I was thinking about pouring the resin down and then recovering the resin with silicone.
Is this a good idea or a bad idea??
Any thoughts? I'm stuck and annoyed at this point so any suggestions would be great short of completely pulling off the acrylic and resealing.
fficial&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=10918827950835543544&sa=X&ei=ajQOT8iyAYWIrAflg-ydAg&ved=0CCcQ8gIwAA