i need ideas about air supplying multiple tank..

[mrquad]

first of all, please consider my english..

guys, i have an AP-100 air pump that can hold up to 33 sponges.. please show me what to do to supply 15 tanks.. i think what i want is the design and steps on how the air system works.. and what are the materials needed..

i have no ideas about this.. but any help would be greatly appreciated..

thanks for reading!

 

[Pharaoh]

You can do a couple things, but they are all pretty much the same.

Use one or two of these: (About halfway down)
http://www.jehmco.com/html/air_accessories.html

Or you can make your own using PVC and the air fittings at the top of the page. Just plumb it up to your pump and have the individual line go to each tank.

 

[mrquad]

You can do a couple things, but they are all pretty much the same.

Use one or two of these: (About halfway down)
http://www.jehmco.com/html/air_accessories.html

Or you can make your own using PVC and the air fittings at the top of the page. Just plumb it up to your pump and have the individual line go to each tank.

thank you for your quick response.. i appreciated it very much.. and also for the link provided, it is really helpful..

what i want now is the diagram of the setup, it is indeed so easy to think but it's hard to do..

thanks again!