Want to Buy I need these parts from fx4/Fx5/fx6

[SocalBeastAquatics]

Price

0

Region

Southern California

State

California

Location

Rialto

Pickup or shipping

Pickup only

I need the two red valves for inlet and outlet.
and the tightening screws.
purchased a fx4 with missing parts
I’m Located in Southern California.
Thanks in advance

 

[JasonsPlecosCichlids]

https://amzn.to/3D4U01s

Hagen Fluval FX6 Lid Fastener


https://amzn.to/3TATJuf
Fluval Fx5 Aquastop Valve and O-Ring, 2-Piece

 

[SocalBeastAquatics]

https://amzn.to/3D4U01s

Hagen Fluval FX6 Lid Fastener


https://amzn.to/3TATJuf
Fluval Fx5 Aquastop Valve and O-Ring, 2-Piece

Yea I seen them on Amazon. I will most likely buy the valves from Amazon but the gray fasteners are $15 a piece. And I need almost all of them so want to see if anyone has spares.

 

[FJB]

These seem to be home made via 3-D printer. There shouldn't be any reason why they would not work. Worth the risk??? (8 bucks for eight of them, you supply your own screws).

Fluval FX4 FX5 FX6 Canister Filter 8x Lid Fastener Barrel Nut Cover Lock | eBay

The problem is we tend to over tighten them. it takes very little pressure to seal the lid. always have spares ready to go. Set of 8 fasteners color may vary 3D printed.

www.ebay.com

 

[SocalBeastAquatics]

These seem to be home made via 3-D printer. There shouldn't be any reason why they would not work. Worth the risk??? (8 bucks for eight of them, you supply your own screws).

Fluval FX4 FX5 FX6 Canister Filter 8x Lid Fastener Barrel Nut Cover Lock | eBay

The problem is we tend to over tighten them. it takes very little pressure to seal the lid. always have spares ready to go. Set of 8 fasteners color may vary 3D printed.

www.ebay.com

Thank you I will look into these if I don’t find originals for good price I appreciate it

 

[714car11]

I have 2 valves and the top clip. And some new sponges give me 25 for everything. Located in Ontario 91764

 

[KWW]

Please test to me I have them too 6265888634 in city of Rancho Cucamonga ca 91730 thanks

 

[i Aqua]

I need the two red valves for inlet and outlet.
and the tightening screws.
purchased a fx4 with missing parts
I’m Located in Southern California.
Thanks in advance

View attachment 1505573

View attachment 1505574

Amazon has them as many you want.

 

[SocalBeastAquatics]

Please close thread.
Bought the valves and what I needed. Thank you