indoor brick built pond with viewing window

[bigdazz]

OK i want to make a indoor brick built tropical pond with a large viewing window at the front the whole thing will be around 7ft by 3ft by 3ft has any one got any info on doing some thing like this?

/ what to use to seal the brick work with to hold water and how to fit the glass please help

 

[me_wee_todded]

use sanitred or pond paint type stuff to seal it

 

[wizzin]

OK i want to make a indoor brick built tropical pond with a large viewing window at the front the whole thing will be around 7ft by 3ft by 3ft has any one got any info on doing some thing like this?

/ what to use to seal the brick work with to hold water and how to fit the glass please help

IMO, use concrete block and face it with brick if brick is what you want to see. Bricks are typically 4"w, so your tank walls would only be 4" thick. Not enough to hold back that much water. You'll also have better luck getting a sealing material to cling to block vs brick. Check out my thread below called "building a 1000 gal concrete block tank" too.