I'm refurbing a 250. I wet sanded the entire tank and I'm using PlastX on the outside.
I was wondering if it's safe to buff the inside with PlastX.
I was wondering if it's safe to buff the inside with PlastX.
Is Meguiars PlastX safe to use inside an acrylic tank?
- Thread starter PufferCorps
- Start date
I believe it is, I've heard of people using other Meguairs products on tanks not a 100% sure in regard to Plastix I have used Novus with good results.
wednesday13
would know
wednesday13
would know
Thanks!
Wailua Boy
I think i need to start all over again inside the tank. @wednessday13
theres just TONS of calcification causing a haze. I started out with the power hand sander, and went all the way through all the grits by hand 3 times, and theres still a fog. I can definitely feel it and it makes a shhoooshing sound.
i plastered the areas around the bottom, sides and back with vinegar soaked paper towels and let it sit for 12 hours and it barely touched it. I also have and odd calcification in ALL the inside corners, AS WELL as TAPE!
WHO puts tape on a tank???
Christ!
Heres pics of the progress. I'm tearing into the left inside wall while im waiting for guidance.
Heres my fix-it gear
Theres the vinegar soaked paper towels on the back
The haze is nutz! Ive sanded this thing for 72 hours at least. Vinegar is useless to stop it.
Please advise. THANK YOU!
Wailua Boy
I think i need to start all over again inside the tank. @wednessday13
theres just TONS of calcification causing a haze. I started out with the power hand sander, and went all the way through all the grits by hand 3 times, and theres still a fog. I can definitely feel it and it makes a shhoooshing sound.
i plastered the areas around the bottom, sides and back with vinegar soaked paper towels and let it sit for 12 hours and it barely touched it. I also have and odd calcification in ALL the inside corners, AS WELL as TAPE!
WHO puts tape on a tank???
Christ!
Heres pics of the progress. I'm tearing into the left inside wall while im waiting for guidance.
Heres my fix-it gear
Theres the vinegar soaked paper towels on the back
The haze is nutz! Ive sanded this thing for 72 hours at least. Vinegar is useless to stop it.
Please advise. THANK YOU!