Hi. I drawn this tank just for the mfk big tank lovers. Note. No filtration is shown, I am working on drawing a manually controlled rapid sand filter arrangement, it would have to be big. My idea is that water from out at sea, some two hundred M is drawn in with large centrifugal solids handling pumps, and feed through a filter system that makes use of some mild solids filtering, and stores a large batch of water in multiple reservoirs, which is tested by a team of skilled aquarist for industrial waste, before being feed into the actual tank, multiple reservoirs are used, so the feed is constant. Chlorination and then de-chlorination is an option for the natural sea water before it is feed into the tank. The tank its self has a group of massive rapid sand filters, and possibly some skimmers, 'big ones', that use bidirectional water flow, to maximize water to air contact per cycle through the unit. Water outlets from overflows in the tank into a nearby bay, which benefits the bay marine life by increasing water flow through the bay. The entire tank rapid sand filter, water treatment systems, and valve status could be monitored from a control room, with motorized valves controlled from the control room.
Any sugestons as to other things I should draw? ps, this would be about ten times the size of the largest aqurium in the world curranly.
Any sugestons as to other things I should draw? ps, this would be about ten times the size of the largest aqurium in the world curranly.
