Large, easy DIY set-up for any species

  • We are currently upgrading MFK. thanks! -neo

FireMedic

Plecostomus
MFK Member
Dec 13, 2007
805
36
61
Middle of somewhere, Oulu Wisconsin
I developed this set-up for the purpose of breeding P. Motoro in my basement. I had to disassemble my staircase to move the main tank downstairs. I have spilled just shy of 300 gallons of water trying to balance and configure everything. Here you go.

Overview.JPG

supports.JPG

drain.JPG

sump view.JPG

feed pipes.JPG

blkhd.JPG

alt spry.JPG

internal WD.JPG

try mod.JPG

try rmvd.JPG
 
nice setup....
 
Do you keep it heated?
if so what do you heat it with?
 
what was the total cost on that set up???
 
I have some very productive swordtails in another tank and created this floating refuge for the fry.
I would like to send a shout out to my talent coach Bobo Da'Bassett and my Personal Trainer Selena Da' Lab.

nursery.JPG

swrd fry.JPG

Minion.JPG

Bg Mom.JPG

El Guap.JPG
 
ceeej31;1876637; said:
how much did it all cost?
Blue tank $110, Grey tank $80.
Blue 350 gallon, Grey 150 gallon.

It is heated using (3) Hydor Theo 400w heaters located in the sump between the FBF and the plants. My basement is about 65 degrees year round, the tank stays at 78-80 even though the heaters are set at 75.
I purchased the media real cheap from the Market Place, $70
The trickle plate is from a "Dogloo" dog house floor. I had way to much time on my hands and decided to go at it with a drill and countersink.
 
MonsterFishKeepers.com