Added a bit of water to check the seals on my new 125. There appears to be about a 3/4” difference between the left side of the tank and the right side of the tank. Front to back is level. Any ideas for how to go about levelling this? Is it necessary to fix?
Levelling a 125
- Thread starter Aidenwb
- Start date
Well if you have overflows in the back left and back right of the tank then you def want to fix. For a 125 you can use wood shims. The cost $1.50 at HD. If you are handy you could make your own but they are so cheap you can buy them.
You can shim it as mentioned, you will need to shim the stand not the tank.
I know that seems obvious but I’ve seen some people try to level the tank.
Make sure that it remains level front to back as well as corner to corner in an X (front left to back right and back left to front right) the last thing you want is to have any twisting.
I know that seems obvious but I’ve seen some people try to level the tank.
Make sure that it remains level front to back as well as corner to corner in an X (front left to back right and back left to front right) the last thing you want is to have any twisting.