Looking for a good quality hang on Air Manifold

[excaliber]

Does anyone have any recommendations for a 3 valve manifold that will hang on the back of 40 breeder and 75 gal tanks? I'm looking to run two Sponge Filters and have a spare.
I looked at a few online but can't tell if they will fit on the back of the tanks?
The imagitarium clear manifold will not fit on the 75 gal tank.
I've seen some others but they all look cheap. Most have plastic shut off valves and the metal ones do not have a bracket to sit on the tank.
Is there a decent 3 valve manifold that will hang on the back?

 

[Mdoka]

Never had this one, but would this work? The hanging part looks plastic, but the orafice is metal. https://www.google.com/shopping/pro...&ved=0ahUKEwiujfy-tY7gAhVhpoMKHermBF8QgjYImgU

 

[excaliber]

I saw those at Petsmart yesterday. The one good thing is the metal shutoff valves but I'm not to keen on Top Fin products.

Thanks for the link

 

[J. H.]

A soda bottle, a hanger, and a drill. You won't be able to close the valves easily. Do not drill the PET soda bottle - only the HDPE cap. Drill the holes slightly smaller than the airhose and cut the airhose to a point. Feed the point through the hole and pull it through with a pliers. It works with no leaks if you do it right. To close a valve you cut it and tie it, or cut it and clamp it with a black paper clip.

 

[excaliber]

I'm looking for something a bit more high tech and production looking as they will be visible and on a show tank or two. Interesting idea though.

 

[CarpCharacin]

Here is another one, but it doesn't look like it's too different from the top fin one: https://petoverstock.com/ista-metal-air-valve-4-outlet.html

Just curious, why do you need it to hang on the back of the tank?

 

[excaliber]

That one looks a bit better. I'm going to see if it fits my tanks. Thanks for the link.