Looking for an overflow...

[dirtyblacksocks]

Picked up a stronger pump and my single overflow just can't handle what it's putting out - looking for a HOB overflow, DiY or professional grade, doesn't really matter.

Thought I'd throw it out there before I head to the Depot and build one myself.

 

[West1]

Picked up a stronger pump and my single overflow just can't handle what it's putting out - looking for a HOB overflow, DiY or professional grade, doesn't really matter.

Thought I'd throw it out there before I head to the Depot and build one myself.

Dude, I just tossed one out Sunday Night. Monday morn the trash dudes picked it up.

the one thing i dont post up someone wants
Just Overflowbox but nothing else
Sorry dogg, thats why i post things

 

[dirtyblacksocks]

Haha no worries bro - that's always how it is.

I've also got a RIO3100 and SEIO2600 I can trade for these, the SEIO will act as a powerhead only but is a frick'n powerhouse of a stream - the RIO3100 puts out a decent amount of water at a 5' head...enough to keep up with a single 1" overflow pipe (I think that's 600 GPH?)

 

[West1]

Haha no worries bro - that's always how it is.

I've also got a RIO3100 and SEIO2600 I can trade for these, the SEIO will act as a powerhead only but is a frick'n powerhouse of a stream - the RIO3100 puts out a decent amount of water at a 5' head...enough to keep up with a single 1" overflow pipe (I think that's 600 GPH?)

Y not just poke another hole on the side of your Hang on and throw a washer and buy a couple feet of 2" Hose from Home Depot?
I think it would be less choping up to do (as far as fitting another hang on to the top-back of the tank... JMO)

 

[dirtyblacksocks]

Hang is a small one, not enough room for another bulkhead on between the divider side where the U-Tube input comes and the output side...

If you've got pics of what you're talking about I'm all for it - I might just fork out the cash and buy a dual outlet CPR, do real PVC plumbing, blah blah blah.

 

[West1]

Hang is a small one, not enough room for another bulkhead on between the divider side where the U-Tube input comes and the output side...

If you've got pics of what you're talking about I'm all for it - I might just fork out the cash and buy a dual outlet CPR, do real PVC plumbing, blah blah blah.

Sorry I had a lot of trouble trying to download the last pic from my head to the PC. It was just a thought.

There is no way you can open the size of the drain on the Hang on?

Otherwise...G/L doggie dogg

 

[dirtyblacksocks]

Pretty sure I'd just crack the acrylic bro - think I'm better off forking $15 or whatever it is to make the PVC ones than cracking a $60 one, haha.

 

[BOTR]

If you're interested I have this one:
http://www.premiumaquatics.com/Merc...&Product_Code=CS100&Category_Code=CPROverflow

Would do $50 shipped, it's in excellent shape. I tossed the sponge out as it was just a spot to clog.

Thanks,
Chris

 

[dirtyblacksocks]

Found one, thanks John.

Mods can close please.

 

[jlnguyen74]

Found one, thanks John.

Mods can close please.

Thank you I'll see you tomorrow