Looking for some help to set up multiple tanks through a sump

[hookedonfish]

Hello everyone

I'm looking for ideas and information on how to set up some tanks running through a sump. The tanks will be
90cm wide
90cm lenth
55cm high
each tank measures to 455L but will be 400L ea cause they won't be filled to the top. So a total of 3600L for each system but will be roughly 3800L for each system after the sump and all the media is put on.


There will be 9 tanks of this size on a steel stand 3 up and 3 across. The sump will be used on the ground on a crate and exactly the same size of tank being used.

I'm really mind blank on how i will put all of this together, so could some one please explain how i can put all of this together please, it will be alot of help. Picture of a similiar setup would be very helpful for me or even links.
I know i will have to put a whole into each tank at the top and run pipe along to each tank.

Can someone please help me

 

[CHOMPERS]

http://www.monsterfishkeepers.com/forums/showthread.php?t=36298

This is a three tank system. I have another system with 14 tanks, but my camera went MIA at the boat ramp two weeks ago The principal is the same though.

 

[Fish Eat Fish]

Have each level overflow down to the next. (route the overflow to the out put of the tank below) then at the bottom 3 tanks overflow to the sump. Then just use a powerfull pump to pump water back up to the top where it will be split to the 3 tanks.