Looking for some input

[pengu13]

I'm hoping to get this started in the next couple weeks. The tank is goin to be made of 3/4" plywood i'm goin to coat it in sweetwater epoxy paint.
Tank dimensions are L 96"x W 30"x H 36" the glass front will be 15mm 24"x72".I'm Looking to build the filter in the one end of the tank so it will be 12x30x36. I'm thinking a couple filter socks and some sponges in the first part then 4L of seachem matrix and 500ml of seachem purigen in the second and the pumps (2X Quiet one 3000) and heaters (undecided) thinking finnex titanium maby a 800w and a 500w in the third. I guess what i'm asking is do you guys think it will work out alright

 

[justin guest]

Just make sure you have enough filter socks planned as the mech filtration is where the deficit in the filtration will show first. Build in some airstones into the bio chamber if you want more o2. Otherwise filter looks good. Not sure about the epoxy. Others have more experience in that area.

j<><