What is the best way to do this, I basically just want to transfer the fish from TANK A, to TANK B.
They 2 tanks are quite a distance from one another, but still on the same property.
I have a couple of nets, including one XL and one XXL, but I don't trust them.
I've got a pretty bad feeling that the fish might break/tear the nets or/and end up injuring itself.
I'll be honest here, I'm not entirely comfortanble with handling any fish by hand.
It's a RTC that I would like to move, it's around the 22inch mark now.
There's also a Cigar Shark that's smaller than that, but I'm not too worried about how to move that one.
All I have done so far is >>>
Drained the water to 1/2 way in TANK A (to stop tank-jumping and limit the splashing)
I have cycled and tested the water in TANK B, and checked that everything is 100% there.
Any help with this would really be appreciated
Thanks
They 2 tanks are quite a distance from one another, but still on the same property.
I have a couple of nets, including one XL and one XXL, but I don't trust them.
I've got a pretty bad feeling that the fish might break/tear the nets or/and end up injuring itself.
I'll be honest here, I'm not entirely comfortanble with handling any fish by hand.
It's a RTC that I would like to move, it's around the 22inch mark now.
There's also a Cigar Shark that's smaller than that, but I'm not too worried about how to move that one.
All I have done so far is >>>
Drained the water to 1/2 way in TANK A (to stop tank-jumping and limit the splashing)
I have cycled and tested the water in TANK B, and checked that everything is 100% there.
Any help with this would really be appreciated
Thanks