So I have a heavily stocked 180. Using 1 fx5 And 3 ac110s.....looking to replace my 2nd fx5 that recently quit on me. Water test have always been good but water never seemed crystal clear. Anyway this is what I decided to do with the 3 ac110s. I went to home depot bought the thick white circular buffing pads used for for wood floors no chemicals are in the pads I tripled checked. They cost $6 each I bought 3. I cut them to the same size as the stock ac 110 sponge. Make sure you rinse them very well after you cut them
At the bottom of the ac110 i put 12 scrubbies then 2 layers of the buffer pads that I cut then the stock sponge on top. I did this to all 3 filters and my water was crystal clear in a few hours. Water test still good. I know the buffer pads will probably clog within a month so thats why i used them in the ac 110s so i can reach and clean them very easily as needed. What do you guys think?
Sent from my SAMSUNG-SGH-I717 using MonsterAquariaNetwork App

At the bottom of the ac110 i put 12 scrubbies then 2 layers of the buffer pads that I cut then the stock sponge on top. I did this to all 3 filters and my water was crystal clear in a few hours. Water test still good. I know the buffer pads will probably clog within a month so thats why i used them in the ac 110s so i can reach and clean them very easily as needed. What do you guys think?
Sent from my SAMSUNG-SGH-I717 using MonsterAquariaNetwork App
