What kind of skimmer is this? When I was first using my CPR Bakpak, the out flow was getting blocked (a result of running it for the first few days and picking up a lot of debris) and that caused it to overflow. If the outflow is getting obstructed that will easily overflow your skimmer. Otherwise I can't see why you would be having this much trouble with it...
My Reef Tank
- Thread starter SkySouza
- Start date
So my next project is the construction of 500+gallons of salty h2o. I have a standard acrylic 240 with a 135 glass sump, a 100 gal cube display acrylic refuge (possible seahorse dimensions 24" deep x 30" wide x 30" tall), and a 60 gal glass frag tank. The tanks are all waiting patiently in the garage. I've just started building the stand... the plan is to build it slowly yet surely. I've been moving tanks so much that I haven't taken as much time to enjoy it as I'd like so I'm going let the 75 stand the way it is for awhile. Stand is going to be L shaped in the corner of my great room with the cube on the short leg and the 240 on the long one obviously. I'm also contemplating on how I am going to plumb this all together. I think I am going to actually set up the 240 and 135 on it's own system, the 100 gallon refuge on another with the frag tank under it, and then two large connection tubes extending from the 240 to the cube. I think if i set it up correctly with the connection tubes above the drains I would not have to worry about both systems running dry incase of a catastrophic leak. I hope that makes since. I have some diagrams I'm going to through up as Of coarse I am going to do a build threadI want to complete the build before starting the thread that way I don't leave y'all in limbo in between posts.
Lol, wake up - you're dreaming.
