I have another post about a haze in the glass I cant get out so I'm just seeing what my options are. I've seen videos on youtube of people changing panels of glass on their aquariums but all the aquariums seem to be 55 gallons or less. Just seeing if anybody has experience with changing big panels of plate glass. It would be the front glass on a 180 which is 6'x2'x1/2". Any advice would be greatly appreciated.
Need advice on replacing front panel on a 180g glass tank
- Thread starter DustinB32
- Start date
To replace one piece of glass without resealing the hole thing is to risky in my opinion. Buy a new front pain and reseal the hole thing.heck I might be wrong tho if you cut the seal out of the inside of the hole tank and the front pain then silicone the front pain in and seal the hole tank at the same time you might get away with it. I would try it... also not my house or my floor