Need help capping bulkheads on 100 gallon rubbermaid tote.

[SandNukka15]

Ok so I have a 100 gallon rubbermaid stock tank i was using as an above ground sump for my old 600 gallon but now i need to cap it to use as a tank to age water for my 180 gallon. I have 2 threaded plugs for the inside and 2 caps for the outside pvc. I have all purpose pvc glue but wasnt sure if i should use it on all 4 caps and plugs or just use teflon tape for the threaded plugs and cement for the back of the pvc fittings.?


Also any ideas on a cheap cover doesnt have to be see thru. Just enough to keep humidity in.

 

[deeda]

Why not just use Teflon tape on the plugs and see if they hold and don't leak?

 

[SandNukka15]

Dont feel like draining again and gluing if it does

 

[SandNukka15]

Any other thoughts?

 

[SandNukka15]

I glued the outside just screwed in the inside plugs with tape hopefully it doesnt leak

 

[twentyleagues]

Glue on the outside caps and you are done. You don't need the inside ones at all.

 

[Luke tomkinson]

Good luck!!