Need Help From You DIYER's

[mr.reef24]

Well I look through the builds and setup's in the article's section and notice monster tank's built with wood and then some kinda epoxy to hold all to keep water in and these big piece's of Acrylic for the viewing. My question is to those that build these tank's can you reference some website or information on step by step to building these along with were you get your supplies? As well as acrylic panels and a list of all the thing's you use to bond and hold and anything else I might be missing.

Thanks kindly in advance for your help and recommendations

Mr.Reef24

 

[Austin]

do a search and there is loads and loads of info...

 

[mr.reef24]

do a search and there is loads and loads of info...

What should I type as the search something like DIY plywood tank's? that's why I posted this thread cause I'm not sure what exactly to look for.

mr.reef24

 

[shelbyzman]

Here is one link:http://www.garf.org/140.gallon.html
When doing a search on here, just type in plywood or plywood tank.

 

[basslover34]

Unfortunatly there isn't going to be a step by step for these tank builds (although Garf is a great resource! Ultimatly it comes down to every tank is different and every location is different so purchase of materials is not going to be the same everywhere.

If you are looking for help in figuring out what you need to do then you could always post up your ideas and between the 100 or so regulars here i'm sure that we will be able to help you figure out your shopping list as well as give you an idea where you'll need to look for each piece, some of the plans could also be worked out for you here if you need the help in that area as well.

 

[Pharaoh]

^^^^ What he said.

 

[mr.reef24]

thanks all for the replies and shelbyzman for the link

mr.reef24

 

[greengiant]

when you build share with all of us we like to help where we can

 

[swede]

talk to camshaft...... he is a genius with acrylics

 

[mr.reef24]

when you build share with all of us we like to help where we can

I sure will and appreciate the offer's to help I will contact him Swede. His name is camshaft wonder if he work's on car's as a career?

thanks again all,

mr.reef24