Need Help with OCEAN CLEAR canister

  • We are currently upgrading MFK. thanks! -neo

Riv D

Feeder Fish
MFK Member
Mar 27, 2008
654
1
0
Kaohsiung
I just need to know if the inlet is at the top or the bottom?:irked:
There's no diagram and it doesn't really state this is the instructions,
So if you own one of these please let me know.
THANX.:D
 
http://www.redseafish.com/languages%5C95%5Cpdf%5Coceanclear.pdf

Using Teflon tape, thread the
inlet Hose Adapter into the 3/4" threaded hole located at the top of the Filter
Body. Insert the outlet Hose Adapter into the 3/4" threaded hole located on
the side of the base of the filter body. Do not over tighten the Hose Adapters.

This means the side top is the inlet and side bottom is the outlet, which it appears is how the diagram has it.
 
RegalAngel;3213428; said:
http://www.redseafish.com/languages%5C95%5Cpdf%5Coceanclear.pdf

Using Teflon tape, thread the
inlet Hose Adapter into the 3/4" threaded hole located at the top of the Filter
Body. Insert the outlet Hose Adapter into the 3/4" threaded hole located on
the side of the base of the filter body. Do not over tighten the Hose Adapters.

This means the side top is the inlet and side bottom is the outlet, which it appears is how the diagram has it.

Yes, but just b4 that it says "If you are planning to use 2 Ocean Clear filters...",

which you left out, and this is why it was confusing to me.
-But Thanks for the help!
 
This is how it works water comes from the tank to the pump then to the canister, water enters to the canister from the top and exit from the buttom to the next canister top again and exit from the buttom back to the tank, couple of tips don't put to much teflon 3 to 4 turns don't over tite, do it with you're hands i crack one because of to much teflon i put c clamp around the inlets before i titen now it will prevent cracking also you need quik disconet before and after the canister also before the pump i will be very conveniance when i comes to service the canister as usual mechanical first then bio, i used panworld 50px as a pump or a ps3 dead silence pump i change pumps the ps3 in winter because it's cold in here this pump raises water temp also for the noyse i'm more indor, i run two canister inline first it's a 25 microm follow by second canister fill with eheim lava media and still have plenty of water back to the tank next time i will conect another unit with more bio because i think flow it's too much and bacteria won't cultivate as quick as i want. Finally i have to say i love this filter i also have eheim 2262 2260 2250 and i prefer ocean clears water cristal clear with the microm easy to mantain last forever have also an extra microm for service clean them in a bucket with a bit of clorine, or sometimes just rinse with a garden hose and buck again i hope this help you good choise
 
hey bro! is your filter like mine???? i am having hard time putting this !@#$%^& together...
 
CichlidsRool;3254903; said:
hey bro! is your filter like mine???? i am having hard time putting this !@#$%^& together...
Sorry but the picture it's not clear i only see top port and you're model it looks a bit different i don't know if it's an older model or something else
 
MonsterFishKeepers.com