Need ideas for a 'in built' filter/sump for a glass/ply tank

[henward]

a filter maybe behind the tank back wall perhaps? or ont he side?
so i dont have to have a sump under or beside the tank.
any ideas?
something that can house 4x filter sucks and ALOT of bio media

ideas, feedback, links, help would be awesomeness!

 

[Gill Blue]

hamburg mattenfilter.

 

[Towhead]

I'm planning on doing something similar. I want to incorporate two separate mechanical and wet/dry biofilters along with a bog filter. My crude excel representation shows a cross section view with the full length of the tank. This is going to be a 200 gal aro/poly tank. Water will pull from a low level in the main tank, and flow through a baffle system so that it has to percolate up through three different densities of mechanical filtration. It then overflows again through the wet/dry biofilter (bio balls) and lands in a sump like area. This is where the water will be pumped into my bog where plants will rob nutrients from the water before it enters the main tank again. The main tank and the bog are not shown. From back to front it would go Mech and Bio Filter then Bog then Main Tank. I'm planning to make a 3D model soon. If you're interested, I will post it here. Good luck man.

Sent from my SPH-D710 using MonsterAquariaNetwork App

 

[Towhead]

Sent from my SPH-D710 using MonsterAquariaNetwork App

 

[Towhead]

Having problems posting photos with my phone. I'll get back to you later.

Sent from my SPH-D710 using MonsterAquariaNetwork App