I need an acrylic lid made for a 12"x6" refugium. There is no lip on the refugium so the lid will need a lip to hug the refugium so it cannot be knocked off.
Heres a pic of refugium
Heres a pic of refugium
Need sm acrylic lid made...
- Thread starter toehead11183
- Start date
- Status
Go to Lowes or somewhere like that and buy a piece that will fit it. Cut it to size then drill four holes in each corner so that you can put little pegs in the holes that will go down by the inside of the casing to keep it from sliding off. I did not explain that very well, but that is what you can do for probably under $10.
toehead11183;1484248; said:
Hopefully, what I said made sense. If not let me know, and I will make a prototype out of cardboard and post a picture of what I mean.
- Status