hi all , i just bought a resun , second hand from a brother. but the moment i turned it on , it spurted water from the sides ,until my whole room was filled with water. its fine now , had to put it to full blast on both in / outlets and i cant lessen any of them because if i do , water will start spurting out again. i need help urgently somebody please tell me what to do!!
NEED URGENT HELP WITH CANISTER FILTER!
- Thread starter point08
- Start date
The water level in the canister may be to high. Mines, XP3, did that when I put to much water in there. Hope that helps.
Sorry not familiar with your brand canister filter.
Your Xp3 blasts water from the sides when you turn it on
but you fixed this by putting less water in it, sorry but this really makes no sense at all.
prskiller;2274158; said:
Your Xp3 blasts water from the sides when you turn it on
but you fixed this by putting less water in it, sorry but this really makes no sense at all.Bderick67;2274301; said:Sorry not familiar with your brand canister filter.
Your Xp3 blasts water from the sides when you turn it on
I agree, the canisters should be filled completely and unlike a sump you cant control how much water is in them. If water is leaking from where the top and bucket (or what ever you call it) meet it sounds like either the o-ring\seal is missing or damaged and should be replaced.
that is for any and all canister makes and models...
