New Build Questions...

[waterlife]

Hello everyone. I have some questions that I am hoping to have answered here. I have a 420 gallon acrylic tank that I am trying to set up. I recently purchased two of the 20" overflows from Synergy Reef. I am building a fluidized bed out of a 90 gallon glass tank. Any ideas on how to run all of the drains coming from the overflows? This is where I am getting hung up. Thanks in advance.

 

[aotechs]

My preferred solution is to drill holes in the back panel, use a 90° fitting on the bulkhead, then run flexible hose or PVC with a valve to the sump.

Are your overflows internal or external? If external, just change the 90° in my suggestion to a straight barb.