Hey guys I have a question. I got the eheim 2262 off of Amazon, and I seen there's the straight fitting to come right off the top of the motor, but I was curious idf there's such thing as a 90° elbow for on top of it to make it a bit easier under my tank. I'm making my own pvc in and out's. The tubing and stuff it comes with is hard to work with and not very visually appealing
New Eeim 2262 help!
- Thread starter Dbates18
- Start date
Congrats
D
Dbates18
.
You can rotate the pump so the output fitting can point to the left or right instead of straight up but you won't be able to use the cover over the pump anymore.
Check out the following topic Monster canister filter setup and post #28 for how it looks rotated and post #142 for how to remove the gray pump plate from the pump and reattach it.
Also be aware that you may have to remove the rear stop tab on the green mounting plate that the pump and pump plate mount to because the cord will be in the way.
Any other questions you may have, just ask!
You can rotate the pump so the output fitting can point to the left or right instead of straight up but you won't be able to use the cover over the pump anymore.
Check out the following topic Monster canister filter setup and post #28 for how it looks rotated and post #142 for how to remove the gray pump plate from the pump and reattach it.
Also be aware that you may have to remove the rear stop tab on the green mounting plate that the pump and pump plate mount to because the cord will be in the way.
Any other questions you may have, just ask!
