So I am putting a liner into my indoor pond and I wanted to know if there are any good ways to reduce wrinkles when putting the liner down. When I put the liner in it wrinkles like crazy in the corners. Is there a certain way to fold it or put it in so it goes in nice and clean?
New Indoor pond
- Thread starter Tom
- Start date
well when i had my inground pool installed they sealed off all but one area then vacumed out the air and that helped
Ok, I used the Tetra brand but it had a hole in it. Reccomend any good pond liner brands for my next one?
fold the corners, wont be perfect, but it will look better than the bunched up mess. How thick was the tetra liner?
I'm using a Anjon pond liner, 45mil EPDM . 25 yr warranty.
Try searching ebay for pond liners. I've got my liner from a company called pond-depot.
10'x15' including shipping, cost me $83 last year.
I'm surprised you got a hole in your Tetra. I've had success with a Tetra pond liner in the past. Lasted longer than the pond(emptied it after a couple years)
Try searching ebay for pond liners. I've got my liner from a company called pond-depot.
10'x15' including shipping, cost me $83 last year.
I'm surprised you got a hole in your Tetra. I've had success with a Tetra pond liner in the past. Lasted longer than the pond(emptied it after a couple years)