New sump is up and running. I did all the plumbing at around 5pm yesterday. Its been running for 1 hour now.
Each pump is rated at 2500gph after tank heights ill be looking at 1800-1900 gph. So i have the first pump running from the sump up to the top of the stand below the tank. Runs half way to a T fitting. Then continues to a manifold with 2 valves. The T had a valve and elbow going to my trickle tower. Kinda like a recycle. Each of the 2 valves on the manifold are for a 130gal tank. One one is completely hooked up. Using a pvc DIY overflow.
Pics in a bit
Sent from my iPhone using MonsterAquariaNetwork app
Each pump is rated at 2500gph after tank heights ill be looking at 1800-1900 gph. So i have the first pump running from the sump up to the top of the stand below the tank. Runs half way to a T fitting. Then continues to a manifold with 2 valves. The T had a valve and elbow going to my trickle tower. Kinda like a recycle. Each of the 2 valves on the manifold are for a 130gal tank. One one is completely hooked up. Using a pvc DIY overflow.
Pics in a bit
Sent from my iPhone using MonsterAquariaNetwork app
