Noob question?

[Mymonsterfish]

So I've done extensive researching on building a diy pvc overflow and instead of pvc I'm going with a 1 and half inch abs pipe. Question is do I abs cement the inside of tank piping too? Some sources say yes and some say no. I'm confused as whether it will affect water quality(if yes) and if no what if the pipe falls apart inside the tank. I will post pics as I finish this project (step by step pics for all other diy sump beginners) thnks in advance.

Sent from my SM-N910T using MonsterAquariaNetwork App

 

[Mymonsterfish]

Any thoughts or opinions very much appreciated

Sent from my SM-N900T using MonsterAquariaNetwork App

 

[lardieleftover]

Welli suppose you could just use aquarium safe epoxy/sealent and it would stick. Perhaps lean a rock against it

 

[fishguy306]

You will want to use it on the parts in the tank, it will not hurt anything once dry. I've been told it is actually safe wet too, however why take the risk in that regard?

 

[Jacunaba]

I've built multiple DIY overflows using abs cement without any ill effect. Just don't use excessive amounts and wipe any extra off. There really is minimal contact with the glued parts.


Sent from my iPhone using MonsterAquariaNetwork app

 

[Mymonsterfish]

Awesome. So I've cemented the parts together. Next is drilling the Rubbermaid for pipe fittings.

Sent from my SM-N910T using MonsterAquariaNetwork App