Plugging up drilled holes

[Firemouth1]

I havent been able to sell my drilled 65 gallon so i decided to see if their was a way to keep it. Does anyone know of a product that can plug the drilled holes in the tank?

 

[Firemouth1]

bump, anyone know what to do?

 

[le patron]

i would have said silicon but the water pressure would be way to much and probably force it out within the first day......unless you use a ton!

 

[islander671]

Stick a pc of pvc into the bulkhead and cap it off?

 

[pacu mom]

Stick a pc of pvc into the bulkhead and cap it off?

That is exactly what we did--we closed off an overflow box that way.

 

[chesterthehero]

or put the silicone and glass on the inside of the tank.. then any pressure will just make the seal tighter.... you can also use aquarium safe epoxy insted of silicone...

 

[Knowdafish]

Glass or acrylic tank??? Either way just glue or silicone a patch piece over the hole on the inside.