Plywood Tank test

[pythonlatino]

Got some plastic board for work that there putting it on the walls in the kitchen .

I put some liquid nail .

Then I put some Silicon .

It's a small tank but this is a test .

Now i'm going to get the glass . Tank is 24" x 24" x 24"

 

[john C]

nice looks good i hope it hold water for you

 

[Jkoziatek]

silicon doesnt bond well to wood normally... so it might work on a little version but on a big one there will be way too much pressure

 

[dogofwar]

"silicon doesnt bond well to wood normally"

Liquid nails bonds well to wood. And that's what he used...

 

[Jkoziatek]

yes dogof war, but i think you need to again read what he posted... he used silicon to prevent water form going in between the seams... he bonded the wood together with liquid nails

 

[soggysandwich]

yes dogof war, but i think you need to again read what he posted... he used silicon to prevent water form going in between the seams... he bonded the wood together with liquid nails

i think you need to read it again. he bonded the plastic panels to the wood with liquid nail and then used silicone in the seems aka its only touching plastic

 

[Jkoziatek]

i apologize... you are correct, i misread

 

[pythonlatino]

Put the glass on .
One day later added water .Everthing look good for now.

 

[Jkoziatek]

how many gallons does it hold?

 

[pythonlatino]

It's 24"x24"x24" 59 Gal.
Going to try the same plastic board on a bigger tank.