positioning of Media
- Thread starter soupa2
- Start date
I plan on making a moving bed filter with k1 in a 55 gallon. Thinking of having 3 sections. First and smallest section I plan on having filter sock, floss or sponge etc to pre-filter. That'll move into the second chamber which will be the largest filled with the k1 and air stone. The third where I plan on having the heaters and pumps will have some space for submerged media like pond matrix. Im not 100% sure if the order matters as long as the water is passing through the media but this is just an idea I wanted to try. Hopefully it'll help
Sent from my iPhone using MonsterAquariaNetwork app
Sent from my iPhone using MonsterAquariaNetwork app
What makes you feel you need both? I don't believe you do. I have an MB with 100 micron socks getting the particulate matter and 100 liters (3.5 cu ft) of K1. Danner AP100 blowing it all around. 110 gal stock tank for sump. That's it. With enough K1 agitated properly you don't need anything else. In fact, Matix will take up valuable space you could have more K1 in.
I'd do ceramics before k1. You want to keep the fluidized media as free from particulate matter and debris as possible.
I wouldn't want K1 in the sump. I'd want it in a separate vessel where there will be no fluctuation of the water level.
IF that isn't an option I'd do K1 first, BUT the dead bio will end up all over whatever is down stream - could plug ceramic rings. IF using 2 kinds of bio and both in the sump I'd filter after the K1 as well as before.
IF that isn't an option I'd do K1 first, BUT the dead bio will end up all over whatever is down stream - could plug ceramic rings. IF using 2 kinds of bio and both in the sump I'd filter after the K1 as well as before.
well i have total of 5 section in my sump setup so right now the 1st (filter sock) and 2nd (media bags), 3rd really empty just 2 bags of matrix which i can move back to my 4th section which have the most (about >20L) then last is my pump and heaters.. i can move the 3rd extra bags of matrix back to 3rd and use that section for K1 or move all the matrix from 4th to 3rd and use the 4th for K1s..
well i have 2 breeding motoros and you know them followers are really messy..my sump is a 125 gal and top is my 300gal Marineland DD.. even with < 30L or matrix i still sometimes see ammonia spike a day after feeding so i still would like to have more insurance.. as above mentioned i have an extra section in my sump to use why not use the full benefit of my sump area.. so you're saying Matrix is taking up Valuable Space... well them explain why... i can always convert my sump with matrix then other section K1s...
well currently i have my 30L of Matrix all bagged in 8 laundry bags so where there is dead areas in the sump i have build up of gunk... so if i use K1s i would still have them no matter how i filter my sump... it will end up passing my filter bags... really i;m not too worry about this situation....
**** to all: my signature of my post will have my sump setup and 2 page will have pictures of the running sump... ****