Python Connection Question

[silent1mezzo]

Hey Guys,

I just moved into a condo and theres no way to do my WCs the old way (large bucket) so I'm looking into getting a Python and had a question about the connection.

Here's a picture of my faucet and I was wondering if the python would work with it?


The part on the bottom does screw off, but the threads are on the inside. It's a little annoying to unscrew it every time, but can I connect a python to it?

Thanks,

 

[deeda]

The Python normally comes with adapters to fit a variety of internal & external faucet threads. The only problem you might have is draining the tanks depending on the difference in height between the sink & the tank.

 

[Pharaoh]

The Python normally comes with adapters to fit a variety of internal & external faucet threads. The only problem you might have is draining the tanks depending on the difference in height between the sink & the tank.

x2

 

[silent1mezzo]

Oops, didn't read properly...

The tank would be a little higher, but not much. Are tehre any better solutions? Will this still work?

 

[bbortko]

A python s/b fine, just remove the part of faucet that the screen is in

 

[qguy]

if the height difference is too small, the flow will be weak.