Python to showerhead

  • We are currently upgrading MFK. thanks! -neo
A

antimony

Feeder Fish
MFK Member
May 25, 2007
137
0
0
cali
I want to buy a python just for filling...anyone know if it can attach to the showerhead threads? My faucets are not threaded.
 
Someone wrote a while back there is an adapter for this...

Stop by a plumbing shop with it and tell them what you want to do, they should be able to advise you.
 
Dr Joe;1062267; said:
Someone wrote a while back there is an adapter for this...

Stop by a plumbing shop with it and tell them what you want to do, they should be able to advise you.
Click to expand...

x2 most shower head pipes are 1/2" Pipe thread.
 
I just did this for a garden hose so if you want the python just for refilling look into a garden hose.

I just went to the garden store and got some brass fittings. Couldint tell you what kind, but it took me some time.

Heres what they are.
1- 3/4'male threaded male to 3/4'' threaded
1- 1'' female threaded to 3/4'' male threaded.

Check with the size. I used a new shower head in the store to check.
 
just get a sink to hose adapter at the hardware store. Python sells them for $5 but mine was $2 at the hardware store but I had to drill the hole bigger, what can I say, I have big pipes!
 
i would just go to a garden faucet.... but pythons come with the adapter to thread inside of sinks
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom