replacing aquarium trim

[doomiedee]

i found a 55 gallon in the trash that was in good condition but needs the trim replaced. i found a site called glass cages that sells it but i was thinking about maybe there's a cheaper site or another to build one. or possibly combining it with my 29 then reframing it completely but i was thinking and if i brace were the the tanks join together it will be uneven cause the legth of the tank will be 6.5'

 

[lethalcustoms00]

Getting a new ring for the tank is your best bet. Glass cages, all glass, aqueon, or any lfs should be able to get you a new ring. I wouldn't try to splice those two tanks together though. That really sounds like a recipe for a leaky disaster


Sent from my iPhone using MonsterAquariaNetwork app

 

[imusuallyuseless]

I'd dismantle and use glass to build larger plywood tank, or just do trim.

 

[doomiedee]

Conecting the two tanks is a problem i've practiced doing it with 2 ten gallons and it works just fine .no leaks or bowing its been set up and holding water for 3 weeks now

Sent from my Comet using MonsterAquariaNetwork App

 

[jpac716]

Conecting the two tanks is a problem i've practiced doing it with 2 ten gallons and it works just fine .no leaks or bowing its been set up and holding water for 3 weeks now

Sent from my Comet using MonsterAquariaNetwork App

Do you have any pictures of that I have a bunch of 10 gallon tanks laying around

 

[doomiedee]

its actually a friend at my jobs tank but ill try to get one