Replacment LIDS for Acrylic tanks

  • We are currently upgrading MFK. thanks! -neo
Status
Not open for further replies.

R1_Ridah

In Loving Memory
Apr 4, 2005
5,511
18
0
WEST COAST
By chance anyone have any extra lids they have laying around. Preferably looking for lids that fit 3 TruVu Tanks.

40 Gallon x 2 lids
60 gallon x 2 lids
60 gallon x 2 lids

I know I can go to Home Depot and buy the acrylic sheet but the sheet they sell are too think and eventually bow.

So.Cal preferred willing to pick up within a 30 mile radius from zip 91344.

Thanks
 
J.... there's an acrylic place I go to that sell a thicker density type of acrylic that doesn't bow. I know what you mean by that stuff you get at H.Depot... this stuff comes in any thickness and lays flat.... makes awesome lids (the same stuff most tanks come with as lids)
 
bro go to lowes and get some glass to use. acrylic lids always bow even .5"
 
If you do go the plexiglass route, we ended up using thin strips of metal across the top to keep ours from bowing. Good luck!
 
House_64;2883787; said:
J.... there's an acrylic place I go to that sell a thicker density type of acrylic that doesn't bow. I know what you mean by that stuff you get at H.Depot... this stuff comes in any thickness and lays flat.... makes awesome lids (the same stuff most tanks come with as lids)


Can you fabricate me some? I'll pay you.
 
R1_Ridah;2883999; said:
Can you fabricate me some? I'll pay you.

All you need is to have it cut down to size.... I bought their "scrap" pieces and it fit my 60. If it's in there scrap bin, it's sold by the pound. I think it was $3.50 a lbs.
 
Status
Not open for further replies.
MonsterFishKeepers.com