Almost ready to put in the glass panel in my plywood tank and im using pond armor. I have some momentive 108 on hand and seams like it would work well as it is also an adhesive as well is silicone based. Wanted to get some input before I go ahead and use it, open to other suggestions just want to get it right
RTV 108 with pond shield or something else
- Thread starter Niners4952
- Start date
Any ideas, im trying to do this tomorrow I know only a handful have used pond shield so not alot of you can input with experience so if I don't hear not to use this I am going to give it a shot
i havent had a problem, but im only doing the bottom ply wood.
make sure you sand the area where you are going to silicone
make sure you sand the area where you are going to silicone
Yeah I will be sanding the pond shield with 60 grit and scuff the glass to remove any contaminents
don't scuff the glass, just clean it well with a razor, then use acetone then rubbing alcohol then wipe it down so it's dry
