Sea Clear 20G Wet/Dry

[aldiaz33]

Sea Clear 20 gallon wet/dry filter.

Dimensions: 38"L x 11"W x 12"H = ~ 20 Gallons

What you see is what you get. It has 3 holes drilled on the side. As you can see in the picture two of the three holes have bulkhead fittings. They are older, but did not leak when I tested them a few months ago. The third hole would require a 2" bulkhead fitting as the hole is 2.5" in diameter.

It comes with two 1" inlets (bulkhead fittings).

No leaks, no pump, no bio/filter media.

PM me if interested.

Price: $65

 

[Jb909]

just pm you

 

[aldiaz33]

Location: Alameda, CA 94501

 

[pupumole]

thats ... more than 20 gal...

good price though...
BUMP

 

[aldiaz33]

thats ... more than 20 gal...

good price though...
BUMP

You're right. It can hold 21.71 gallons of water. The bio-towers add to the overall capacity of the bio-media space, but they will not hold any water. I'm not including the bio-tower capacity in the size of the sump because they don't hold any water.

I should make a revision to the dimensions. The sump tank itself is 38x11x12. If you include the bio-towers, the overall dimensions are
38x11x17 (the towers add 5" of height, but no additional water volume holding capacity).

Hope that clarifies.

 

[aldiaz33]

Bump. It's going on Craigslist if no one one here is interested.

 

[aldiaz33]

Price reduced! $50 takes it.

 

[FireMedic]

shipping?
54891

 

[aldiaz33]

Selling locally. Shipping would probably cost more than what I'm asking for it.

 

[aldiaz33]

Bump. If you don't like the holes in the side I can seal those with 1/4" acrylic.