sealant issue

[oscar1658]

After someone mentioned checking your sealant for bubbles I found this bubble, it's not hollow I don't think...should I be concerned? It's a 90 gallon that's been set up for 2 and a half years, I know tanks are always a gamble but personally would this concern you? Thankyou

 

[millerkid519]

Me personally no it would not bother me

 

[Skalper666]

The bubble is still quite far away from the inner seam, so I wouldn't worry about it either.

 

[oscar1658]

Thanks for the replies by 'inner seam' which part do you mean? Just so I know which is the most important parts to the structure

 

[millerkid519]

The inner seam is on the inside the tank with is your secondary seal, outer seam is between the 2 pieces of glass which is also called your primary seal

 

[oscar1658]

Ohh I see but the bubble can be felt from the inside? Still safe? Sorry I really appreciate your patience!

 

[pops]

no worries, you are fine.

 

[oscar1658]

Thankyou very much everyone

 

[Lepisosteus]

that tank is an oldy. Don't worry about the bubble

 

[dallen2233]

my sump use to look like that and it held water just fine. Just be careful you don't lose your structural rigidity.