Setting my RO unit up

[Mentalcase87]

I picked up a used RO unit from a local store. I have tried to find instructions for it on the net and came up with nothing. I took a picture of the unit to see if anyone could tell me which lines go where. I know that one is for the fresh tap water, one is the waste and the last is the RO to the unit I am filling to hold the water.

I have the replacement piece for the one part of the unit that is dirty and I will clean that out before I start to use it. I believe the membrane should also be good to go, but will know once water is being made and I use the TDA measure to figure it out.

Thanks for the help.

 

[HarleyK]

Howdy,

Why not e-mail the manufacturer and ask for a replacement manual?

HarleyK

 

[Mentalcase87]

Thats a good idea, im in a rush to set it up so hadnt thought about that. I also figured all of these have to be rsther similar even with more then 2 canisters. Hopefully someone can help me out before I get a response from them because that can take awhile.

 

[HarleyK]

By e-mail, they may send you a pdf file within 10 minutes ... during business hours, probably not on a weekend.

 

[Mentalcase87]

I am still waiting on them, I'm quite surprised no one can help me. I should probably post this in saltwater.