Shims of leveling

[Angler]

I used shims to level my 125. I put them on each side in the front. Should I have put one in the middle of the stand, halfway between the other two I used, or will It be fine without that support in the middle?

 

[HJ60]

One in the middle would be a good idea. It'll spread the load more evenly.

BTW, Are the shims between the tank and stand or stand and floor? IMOP I would only shim between floor and stand. Then use some styro between tank and stand.

Regards, sa

 

[Angler]

the shims are between the floor and the stand.

 

[VLDesign]

If you can tap a couple in I would. Adds to the overall contact area and eliminates undue stress on the stand.

 

[koliveira]

I agree with above a few in the middle will help.