Hi All,
Thanks for all the nice comment.
Currently, I have the following in the 250 Gallon Tank:
6 small IT (around 3 "in when bought only around 1.5 "in)
1 AT (around 2.5 "in when bought around 1.5 "in)
2 NTT (around 2.5 in" when bough around 1.5 "in)
Mix the above with the following for 2 mths:
3 IT around 10 to 11 "In
1 IT around 7 "in
1 NTT around 9 "in
1 AT around 4 "in
Luckily, everyone still in sound and sweet condition. However, I have
separate all the big guy to another tank which consisit of
4 paroon shark around 2 feets amazingly the big paroon sharks don't even
dare to touch any of the Datnoid.

I will getting back the ST from my old friend tommorow which I sold to him some time ago and from what he told me now is around 18 "in if including the tail.
I need to drive down to another state in my country which is about 1.5 hour journey to get this big guy back. Hppe everything going smooth.
Any advise to prepare the equipment to get this big guy?
I would like to see this big guy again.

Hope everything going smooth.
Thanks.
By Loh
